5 wireless modem, Set up your phone as a usb modem, Set up your phone as an infrared modem – HTC IRIS100 User Manual
Page 68
68 Getting Connected
By default, the Authentication Type for your phone is Open System authentication.
Note For LEAP to work correctly, the receiving phone (your phone) must be set with the same SSID, user name, and
password as the access point.
8.5 Wireless Modem
With Wireless Modem, you can use your phone as an external modem for another device, such as a PDA or a
computer.
Note Make sure your phone has an active dial-up modem connection. For information about setting up a dial-up
connection on your phone, see “Set up a Dial up connection” in this chapter. Also make sure you have connected
your phone to a PDA or computer via infrared, Bluetooth or USB.
Set up your phone as a USB modem
1.
On the Home screen of your phone, click Start > Wireless Modem.
2.
Select USB as the Connection type.
3.
On your PC, disable ActiveSync by clicking File > Connection Settings and then clearing Allow USB
connections. Then connect your phone to the PC using the USB sync cable.
4.
On the Wireless Modem screen of your phone, click
Menu > Start.
The PC will automatically detect that your phone has
been connected. The Found New Hardware dialog box
will then appear on your PC.
5.
In the Found New Hardware dialog box, select Install
from a list or specific location (Advanced) and click
Next.
6.
Select Search for the best drivers in these locations.
7.
Insert the Getting Started Disc into your CD drive. Select
the Include this location in the search check box, then
click Browse and choose the CD drive and root folder
where the modem driver is located. Then click Next.
8.
Wait for the installation to complete, then click Finish.
9.
On your PC, open Control Panel.
10.
Double-click Phone and Modem Options.
11.
Click the Modems tab. Select the new modem from the
Modems list, then click OK.
Set up your phone as an infrared modem
1.
On the Home screen of your phone, click Start > Wireless Modem.
2.
Select IrDA as the Connection type.
3.
Point your phone at the infrared port of your notebook.
4.
On your notebook, disable ActiveSync by clicking File > Connection Settings and then clearing Allow
connections to one of the following.
5.
Click Menu > Start on your phone.
6.
The next thing to do is to add the phone as an infrared modem onto your notebook. To do this,
continue on with the following steps.