Humminbird 700 SERIES 786CI - Manual (Page 71)

62
Cancel MOB Navigation
(only when MOB Navigation is activated)
Cancel MOB Navigation removes the Man Overboard (MOB) waypoint and
exits Man Overboard mode. This menu option will only appear when you are
currently navigating in Man Overboard mode.
To Cancel MOB Navigation:
1. Highlight Cancel MOB Navigation on the Navigation X-Press™ Menu.
2. Press the RIGHT Cursor key to initiate canceling MOB navigation.
3. The Confirm dialog box will appear. To cancel MOB navigation, press
the RIGHT Cursor key once more. To avoid canceling MOB navigation,
press the LEFT Cursor key.
NOTE: After you have cancelled MOB navigation, the MOB waypoint will remain in the
Navigation X-Press™ Menu until it is manually deleted. From the Navigation X-Press™
Menu, select the MOB waypoint, and press the RIGHT Cursor key. Select Delete from
the MOB waypoint submenu, and press the RIGHT Cursor key. The Confirmation dialog
box will appear, allowing you to confirm or cancel the deletion.
Remove Target
(only if a Target is Active)
Remove Target removes the waypoint target from the display. This menu option
will only appear when a target has already been applied to a waypoint.
NOTE: See Introduction to Navigation: Add a Waypoint Target or Trolling Grid for
more information.
To Remove a Target:
1. Highlight Remove Target on the Navigation X-Press™ Menu.
2. Press the RIGHT Cursor key to remove the target.
Navigation X-Press™ Menu