HP Ultrium Drive - Manual (Page 7)

Related documents 7
Dealing with errors
Ultrium features
General documents and standardization
• Enhanced Small Computer System Interface (SCSI-2), ANSI X3T9.2-1993 Rev. 10L,
available through ANSI
Monitoring drive and tape condition 2 SW Integration: ch. 7
Software troubleshooting techniques 2 SW Integration: ch. 1
SCSI Drives FC Drives
Error Codes 1 HW Integration: ch. 10 1 HW Integration: ch. 6
Handling errors 2 SW Integration: ch. 5
How error correction works 6 Background: ch. 4
Logs—see the LOG SENSE command 3 SCSI: ch. 4
Recovering from write and read errors 2 SW Integration: ch. 7
Software response to error correction 2 SW Integration: ch. 3
Software response to logs 2 SW Integration: ch. 3
TapeAlert log 2 SW Integration: ch. 7
SCSI Drives FC Drives
Adaptive Tape Speed (ATS) 6 Background: ch. 1
Autoload 1 HW Integration: ch. 2
Automation Control Interface (ACI) 1 HW Integration: ch. 2
6 Background: ch. 1
Cartridge Memory (LTO-CM)s 1 HW Integration: ch. 2
2 SW Integration: ch. 5
6 HW Integration: ch. 5
Data Compression, how it works 6 Background: ch. 5
Data Compression, managing 2 SW Integration: ch. 5
Design principles 6 Background: ch. 1
OBDR and CD-ROM emulation 6 Background: ch. 1
2 SW Integration: ch. 7
Performance optimization 1 HW Integration: ch. 8 n/a
2 SW Integration: ch. 1
Performance, factors affecting 2 SW Integration: ch. 4
Software design 2 SW Integration: ch. 1
Supporting Ultrium features 2 SW Integration: ch. 5
Ultrium Format 6 Background: ch. 2
SCSI Drives FC Drives