Check cms to managed node communication, Check – HP INSIGHT DYNAMICS T8671-91017 User Manual
Page 26
3.
For each check performed by this task, one of the following status indicators is displayed:
No configuration problem was found
PASS
A serious configuration problem was found. You must resolve the problem for correct
operation of Insight Dynamics.
FAIL
A configuration problem was found. The problem will not necessarily prevent correct
operation of Insight Dynamics, but it may limit or restrict operation of some features.
WARN
Not Applicable: the check does not apply to this type of system.
N/A
4.
Optional: To print a copy of the output, click View Printable Report, then click Print.
This task writes detailed information to the log file (/var/adm/syslog/vseassist.log on
an HP-UX CMS, installation-directory\logs\vseassist.log on Microsoft Windows
systems). Check the log file for details of any problems encountered.
TIP:
The vseassist command line that was executed by this task is displayed on this screen
above the output box. This command is also displayed in the printable version of the report. You
can use this information to create your own diagnostic scripts that can be run from the command
line.
You can review these results again later by selecting Tasks & Logs
→View Task Results... from
the HP SIM menu bar.
Check CMS to managed node communication
This task checks the communication between the CMS and selected managed systems. When
troubleshooting your Insight Dynamics configuration, perform the
task first, to make sure that you do not have any unresolved CMS configuration issues.
Then use this task to resolve communication issues with managed systems where you are having
problems. Some of the problems detected with this option include expired licenses, no open
WBEM ports, and improperly configured SSH authentication. These checks will verify whether
the CMS can communicate with the managed systems in order to perform management functions.
Procedure 4-2 Check the communication between the CMS and managed systems
1.
Optional: Select the managed systems where you are having problems. You can select systems
by checking the selection box next to each system name in the Visualization View in
Virtualization Manager. If you prefer, you can start this task with no systems selected. In
that case, you are prompted to select the systems from the available HP SIM system collections
after the next step below.
2.
Select Diagnose
→Troubleshoot Insight Dynamics→Check CMS to Managed Node
Communication...
from the HP SIM menu bar.
3.
Optional: If no systems have been selected yet, you are prompted to select from the available
HP SIM system collections. If you have already selected systems, then those systems are
displayed in the Verify targets screen. HP SIM provides several options for adding or removing
systems on this screen. For help, select Help
→For HP Systems Insight Manager from the
HP SIM menu bar, then select the “Operations” topic and the “Managing with tasks” subtopic.
4.
To schedule this task to run periodically or at a set time, click Schedule. The Schedule Task
screen is displayed. Help on scheduling options is available from that screen. After the task
executes, you can view the results by selecting Tasks & Logs
→View Task Results... from
the HP SIM menu bar.
To run this task immediately, click Run Now. This executes the vseassist command on
the CMS and displays the results in the Stdout tab.
26
Troubleshooting