HONDA AUTOMATIC DAY/NIGHT MIRROR (ATTACHMENT KIT) User Manual

Page 4

Advertising
background image

4 of 10

AII 30556 (0509)

© 2005 American Honda Motor Co., Inc. - All Rights Reserved.

13. Remove the right kick panel (pull to release the

two clips).

CLIP

RIGHT KICK

PANEL

TAB

TAB

14. Turn the knob clockwise, and remove the driver’s

dashboard under cover (one clip).

DRIVER’S

DASHBOARD

UNDER COVER

HOLDER

CLIP

KNOB

Turn

clockwise

90°.

15. Remove the driver’s dashboard lower cover:

• Remove the fuse box lid, and open the pocket.

• Remove the two self-tapping screws.

• Gently pull out on the driver’s dashboard lower

cover to release the eight clips. If equipped,
unplug the vehicle connector and remove the
lower cover.

16. Open the dashboard pocket lid. Using a flat-tip

screwdriver wrapped with tape, remove the screw
cover by releasing the two retaining clips and two
retaining tabs. Remove the dashboard pocket (one
self-tapping screw, then pull out to release the one
clip and three retaining tabs). If equipped, unplug
the vehicle connector.

4130110H

CLIPS (8)

DRIVER’S

DASHBOARD

LOWER

COVER

VEHICLE CONNECTOR

(If equipped.)

POCKET

VEHICLE CONNECTOR

(If equipped.)

SELF-TAPPING

SCREW

FUSE

BOX

LID

HOOKS (2)

CLIP

RETAINING

TABS (2)

2829302K

CLIP

SELF-

TAPPING

SCREW

RETAINING

TABS (2)

SCREW

COVER

RETAINING TABS (2)

DASHBOARD

POCKET

SMALL

FLAT-TIP

SCREWDRIVER

TAPE

RETAINING TAB

VEHICLE

CONNECTOR

(If equipped)

Advertising