Harbor Freight Tools PACIFIC HYDROSTRAR 97005 - Manual (Page 8)

Page 8 SKU 97005 For technical questions, please call 1-800-444-3353.
UNPAcKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
SEt UP INStRUctIONS
Read the ENtIRE IMPORtANt
SAFEtY INFORMAtION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Risk of accidental
starting; resulting
in serious personal injury.
turn the Power Switch of the
equipment to its “OFF”
position, wait for the engine to
cool, and unplug the spark
plug wire(s) before
assembling or making any
adjustments to the equipment.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Assembly
This equipment may not have a 1.
spark arresting muffler included. A
spark arresting muffler is required
by law in California, on some US
Forest Service land, and possibly in
other areas or situations. Install an
approved spark arrestor before use
if legally required or if engine is to
be used near grass, brush, forests,
crops, or any other flammable
materials.
HANdLE (10)
FRAME (2)
bOLtS/NUtS
(11, 12)
FIGURE A
2. To attach the Handle (10) to the
Frame (2), insert the lower portion
of the Handle into the Frame. Then
secure the Handle to the Frame,
using two Bolts and two Nuts.
(See Figure A.)
WHEEL (1)
LOcK NUt (13)
FIGURE b
3. To attach the Wheels (1), slide a
Wheel onto each end of the Axle
located at the front of the Frame (2).
Make sure air valve on wheel faces
outward. Then secure the Wheels to
the Axle, using one Lock Nut (13) for
each Wheel. (See Figure b.)
WARNING