Hunter Fan 42501-01 - Manual (Page 12)

12
Hunter Fan Company 42501-01 • 10/24/05
9-1. To attach the lower switch housing, connect the plug connector
from the motor to the plug connector from the receiver in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit
together one way. Make sure the connectors are properly aligned
before connecting them. Incorrect connection could cause
improper operation and damage to the product.
9-2. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three #6-32 x 1/2” housing assembly screws.
Lower Switch
Housing
Plug
Connector
Plug
Connector
Detail
Steps 9-1 – 9-2
Housing
Assembly Screw
9 • Completing Your Installation
42501 Sunset Boulevard.indd 10/24/2005, 11:05 AM 12