Harbor Freight Tools 67118 - Manual (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. SKU 67118
manner. Do not use on soft surfaces,
like a bed, where openings may
become blocked.
A heater has hot and arcing or
15.
sparking parts inside. Do not use it
in areas where gasoline, paint, or
flammable liquids are used or stored.
Use this heater only as described
16.
in this manual. Any other use not
recommended by the manufacturer
may cause fire, electric shock, or
injury to persons.
It is normal for the plug to feel warm
17.
to the touch. However a loose fit
between the receptacle and plug
may cause overheating and distortion
of the plug. Contact a qualified
electrician to replace a loose or worn
outlet.
The output of this heater may vary
18.
and its temperature may become
intense enough to burn exposed
skin. Use of this heater is not
recommended for persons with
reduced sensitivity to heat or an
inability to react to avoid burns.
This product is not a toy. Keep it out
19.
of reach of children. Children in the
area of the Heater must be closely
supervised to insure that they do not
come in contact with the Heater.
Maintain labels and nameplates on
20.
the Heater. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
WARNING: Handling cord on this
21.
product will expose you to lead,
a chemical known to the State of
California to cause cancer, and birth
defects or other reproductive harm.
Wash hands after handling.
(California Health & Safety Code §
25249.5, et seq.)
CautiON: tO preVeNt
22.
eleCtriC ShOCK matCh Wide
Blade OF plug tO Wide SlOt,
FullY iNSert.
The warnings, precautions, and
23.
instructions discussed in this
instruction manual cannot cover all
conditions and situations that may
occur. It must be understood by
operator that common sense and
caution are factors which cannot be
built into this product, but must be
supplied by operator.
SaVe theSe
iNStruCtiONS.