HP Digital Entertainment Center - Manual (Page 139)

Initial Configuration 133
Initial Configuration
Configuring audio for Media Center
To configure multichannel audio output for Media Center
audio:
1 Press Media Center on the remote control.
You can also click Start on the taskbar, and
select Media Center.
2 Click Settings, General, Media Center Setup,
and then Setup your Speakers. The Speaker
Setup screen displays.
3 Click Next.
4 Under Specify how many speakers you
have, Select the speaker number that matches your
system. For example, select 5.1. Click Next.
5 Select Test. If you hear tones from all your speakers,
click Next. If you do not hear tones from all your
speakers, follow the onscreen instructions.
6 Click Finish.
Configuring audio for the DVD Player
To configure multichannel audio output for the Media
Center DVD playback:
1 Press Media Center on the remote control.
You can also click Start on the taskbar, and
select Media Center.
2 Click Settings, DVD, Audio, and then
Configuration.
3 Set sound output to match your speaker system.
For example, select 5.1. If you have digital audio,
select S/PDIF.
4 Click Save.
n
If your speaker configuration is not
displayed, click the Sound Effect speaker icon
in the desktop system tray.