Hitachi HV-F31F - Manual (Page 22)

8
Section names and functions
Pilot lamp
Light when power is
supplied.
TRIG IN connector
External trigger signal input
Status lamp
Flashes when
transmitting
DC IN/SYNC connector
Connect to +12 VDC power supply.
Input for external HD/VD and sync
signals.
IEEE1394 connector (see Note)
IEEE1394 cable computer side
IEEE1394 connector end
Camera mounting
screw holes
Camer mounting
screw holes
Lens mount
(C mount)
Note
When power is supplied from IEEE1394,
check for proper current and voltage. If not
correctly indicated, a separate power supply
is required.