HANNspree LT11-23A1 - Manual (Page 65)

64
Auto Adjustment
DOS Mode
1 Press the CHANNEL ∧ or ∨
button to select AUTO
ADJUSTMENT.
2 Press the VOLUME + button to
enable auto adjustment. The
display is automatically
configured for the attached
computer’s display properties.
1 Press the CHANNEL ∧ or ∨
button to select DOS MODE.
The current setting is shown in
brackets.
2 Press the VOLUME + or –
button to toggle the setting
between TEXT and GRAPHIC.
• TEXT – select this option when
using DOS at the command
line.
• GRAPHIC – select this option
when using DOS based graphi-
cal programs.
PC
MENU : CLOSE : SELECT : ADJUST
RETURN
PHASE 15
CLOCK 50
V-POSITION 15
OFF AUTO ADJ .
GRAPHIC DOS MODE
50 H-POSITION
PC
MENU : CLOSE : SELECT : ADJUST
RETURN
PHASE 15
CLOCK 50
V-POSITION 15
OFF AUTO ADJ .
TEXT DOS MODE
50 H-POSITION