Operation, Before starting engine – Husqvarna 7021CM User Manual

Page 7

Advertising
background image

7

OPERATION

TO EMPTY GRASS CATCHER (See Fig. 6)

1. Lift up on grass catcher using the frame han dle.

2. Remove grass catcher with clippings from under lawn

mower han dle.

3. Empty clippings from bag using both frame handle and

bag handle.

NOTE: Do not drag the bag when emptying; it will cause
unnecessary wear.

FIG. 6

GRASS

CATCHER

FRAME

HANDLE

BAG
HANDLE

FIG. 5

OPEN

MULCHER

DOOR

DISCHARGE
DEFLECTOR

BEFORE STARTING ENGINE

ADD OIL (See Fig. 7)

Your lawnmower is shipped without oil in the engine. For type
and grade of oil to use, see “EN GINE” in the Maintenance
section of this manual.

CAUTION: DO NOT overfi ll engine with
oil, or it will smoke on startup.

1. Be sure lawnmower is level.

2. Remove oil dipstick from oil fi ll spout.

3. Engine holds 20 ounces of oil. For type and grade of

oil to use, see “ENGINE” in the Maintenance section
of this manual.

4. Pour oil slowly. Do not overfi ll. Wait one minute to allow

oil to settle. Insert and tighten dipstick, then remove it
to check oil level.

IMPORTANT:

• Check oil level before each use. Add oil if needed. Fill

to full line on dipstick.

• Change the oil after every 25 hours of operation or each

season. You may need to change the oil more often
under dusty, dirty conditions. See “TO CHANGE EN-
GINE OIL” in the Maintenance section of this manual.

Advertising