Installation sequences – haier HRF-305 User Manual
Page 20
Installation Sequences
Installation Sequences
4. Dismantling of the upper fixing plate
Open the refrigerator door, and draw out upward the
O=
O=
O=
O=
O=
O=
O=
O=
O=
O=upper fixing plate cover of
S
SS
SS
S
SS
SS
=
the upper fixing plate.
(2 each in the upper and lower door) _ they are stored separately
Loose 2 hex screw fixing
O
OO
OO
O
OO
OO upper fixing plate.
(2 each in the upper and lower door) _ they are stored separately
Raise and disassemble
O
OO
OO
O
OO
OO upper fixing plate on the refrigerator cabinet door. (2 each in the upper and lower
door) _ they are stored separately
The upper fixing plate is used when you install refrigerator cabinet door. (for installation method, please
refer page 15~17 )
O
O
Upper Fixing Plate
(disassembled status)
refrigerator door
Upper Fixing Plate
(Assembled status)
O
O
5. Connecting the upper fixing plate and refrigerator cabinet door
Put the disassembled
O
OO
OO
O
OO
OO upper fixing plate and cabinet door as shown in the diagram, turn the hex screw a
little.
Draw the cabinet door station meter on the
O
OO
OO
O
OO
OO upper fixing plate to the internal base line of the upper side
panel.
the internal base line
of the upper side panel
cabinet door station meter
after aligning the height of upper side panel, separate the upper fixing plate and the cabinet. (Refer to page
14)
Put the refrigerator cabinet door backside up flatly on a clean floor, and put
O=
O=
O=
O=
O=
O=
O=
O=
O=
O= upper fixing plate as shown
tightly against the upper end line of furniture.
adjust the position, and align the central lines of upper fixing plate and cabinet door, and fix with wood
screws. (10 places each)
Side
panel
Cabinet door
Position
station
meter
backside of refrigerator cabinet door
Refrigerator cabinet door (Upper)
central line
backside of refrigerator cabinet door
central line
Refrigerator cabinet door (Lower)
=====Draw out the station meter from the upper fixing plate.
36
37