Humminbird 385ci - Manual (Page 140)

128
Digits Format
(Advanced)
Settings: Small tenths, Large tenths, No tenths;
Default = Small tenths
Digits Format adds a tenth decimal place to the readouts such as Temperature
and Depth. Use the settings to change the display of the decimal place or
remove it from the digital readouts. Examples of the different settings are
displayed below. Also, see Select Readouts and Views.
NMEA Output
(Advanced)
Settings: Off, On; Default = Off
NMEA Output turns the NMEA* output on or off. NMEA Output should be
turned On if you connect the NMEA Output wires of the GPS Receiver cable to
another NMEA-compatible device, such as an autopilot.
*NMEA 0183 is a National Marine Electronics Association standard for data
communication.
NOTE: A separate purchase of accessory AS-HHGPS may be required for the NMEA
output function.
The following NMEA sentences are output when NMEA Output is turned On:
DPT - Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
Small tenths Large tenths No tenths
Setup Menu Tab