Hyundai HQP421HR - Manual (Page 22)

How To Install Wall Hanger Support
1. Caution
1. Install on the vertical wall surface only.
2. Do not install on the following places to protect the
performance of PDP and to prevent malfunction.
Near sprinkler Detector
Near heating devices
Places where vibration or shock may be applied
Near high voltage electric power line
3. Install in a proper method with the structural materials of the
wall. If the wall is not strong enough to stand weight of PDP
set, reinforce the wall surface before installation.
4. Do not install within a wall.
3. Angle Adjustment(Option)
19
GENERAL INFORMA
TION
2. Parts configuration chart
Wall mount frame
4 screws 4 plastics for
mount frame Spring washer
The angle of PDP may be adjusted from 0 degree to 20 degree in 5 steps with 5 degrees.
Use the angle adjustable hole on the side of fixing panel when adjustment is needed.
(This function is supported with angle adjustable type wall mount frame only.)
5 0 angle
10 0 /0 0 angle
15 0 angle
20 0 angle
Angle adjustable hole 5 0 angle 15 0 angle No angle
* Fixed type wall mount frame does not support angle adjustable function.