Removal/installation, Tsurumi’s operation, service, and repair manual – Tsurumi TPG-2900H-DX User Manual
Page 42
6. REMOVAL/INSTALLATION
Repair of the generator is limited to the replacement of failed components. This section provides the
procedures for removal of failed components and installation of replacement components.
Exploded views and other Illustrations are provided to supplement the replacement procedures.
The item numbers used in the component replacement procedures are identical to item numbers in
the Replacement Parts section. Refer to the Replacement Parts section for part numbers of
replacement parts.
Table 10 provides torque values for the fasteners used on the generator. Tighten the fasteners to
torque value shown to provide the required clamping force.
Page 39
Removal/Installation
Tsurumi’s Operation, Service, and Repair Manual
Table 10: Fastener Torque Values
Ref.
No.
Fastener
Size
Model
Ft-lbs
N.m
Kg-cm
Through Bolt (M8)
M8
TPG-2900H-DX
8.7 — 10.1
11.8 — 13.7
120 — 140
4
Through Bolt (M10)
M10
TPG-4300H-DX
TPG-6000H-DX
TPG-7000H-DXE
17.4 — 18.8
23.5 — 25.5
240 — 260
Rear Cover-to-Front Cover Screws
M6
TPG-2900H-DX
3.6 — 4.3
4.5 — 5.9
50 — 60
8
Rear Cover-to-Front Cover Screws
M8
TPG-4300H-DX
TPG-6000H-DX
TPG-7000H-DXE
3.6 — 4.3
4.5 — 5.9
50 — 60
11
Brush Cover Screws
M5
TPG-4300H-DX
TPG-6000H-DX
TPG-7000H-DXE
2.9 — 3.3
3.9 — 4.4
40 — 45
13
Front Cover-to-Engine Screws
M8
ALL MODELS
8.7 — 10.1
11.8 — 13.7
120 — 140
M3 TPG-2900H-DX
1.5
— 2.2
2.0 — 2.9
20 — 30
14
Ground Wire-to-Rear Cover
M4 TPG-4300H-DX
TPG-6000H-DX
TPG-7000H-DXE
1.5 — 2.2
2.0 — 2.9
20 — 30
15
Rear Cover Bracket-to-Lower Muffler
Support Screw
M12 TPG-4300H-DX
TPG-6000H-DX
TPG-7000H-DXE
21.7 — 28.9
29.4 — 39.2
300 — 400
19
Muffler Support Bracket-to-Front Cover
Screw
M8 TPG-2900H-DX 8.7
— 10.8
11.8 — 13.7
120 — 140
Muffler Support Bracket-to-Rear Cover
Screw
M8 TPG-4300H-DX
TPG-6000H-DX
TPG-7000H-DXE
8.7 — 10.8
11.8 — 13.7
120 — 140
M8 TPG-2900H-DX 8.7
— 10.8
11.8 — 13.7
120 — 140
21
Support Bar Screw
M6 TPG-4300H-DX
TPG-6000H-DX
TPG-7000H-DXE
8.7 — 10.8
11.8 — 13.7
120 — 140
25
Ground Wire-to-Frame Screw
M5
ALL MODELS
2.9 — 3.3
3.9 — 4.4
40 — 45
26
Vibration Mount Flange Nut
M8
ALL MODELS
8.7 — 10.8
11.8 — 13.7
120 — 140