HP TOWERFEED 8100 - Manual (Page 12)

IU 661 / 0047 10 TowerFeed TM for the HP LaserJet 8150/8100/8000
INSTALLATION
Configuring the TowerFeed Option
To configure your printer with the TowerFeed option, go to the Control Panel,
select Printers and there the respective HP LaserJet driver.
Click on Properties, and in the respective window the Configure tab.
In this window click in the pull-down bar for the Optional Paper Sources: to select your TowerFeed model (Fig.
11a). The artwork on the right will show the selected printer with the TowerFeed model installed (Fig. 11).
When clicking on the Paper tab you will see in the Source is: all available paper sources of your printer including
the TowerFeed paper trays (Fig. 12).
In the application programs you select the paper sources in the Paper Setup function (File - Page Setup), where all
available paper sources show up in the respective Paper Sources: pull-down bar(s) (Fig. 13).
Note:
For further information on Tray and Media Type definition please also refer to APPENDIX B - Tips & Hints of
this manual.
Fig 11 Configure Tab
Fig. 11a Optional Paper Sources
Fig. 12 Paper Tab
Fig. 13 Page Setup (Word 7)