Hitachi 60V525E - Manual (Page 46)

CHANNEL MANAGER
46
ON-SCREEN DISPLA
Y
Use the CURSOR button ̆ or ̄ to review more channels.
Press EXIT to quit the menu or select CHAN. MANAGER to return to the previous menu.
Move SEL Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Chan. Manager
Channel List
Move SEL Select
Channel Source
Auto Channel Scan Start
Chan. Manager
Ant. A
Channel List
Antenna Cable(1) Cable(2)
This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory
(SCAN), and which are protected by LOCK.
Channel
List
Use this feature after Auto Channel Scan is completed to add (On) or skip (Off) additional channels to
the remote control channel
̆ or ̄ buttons.
Scan
To add (Scan-On) or skip (Scan-Off) additional channels while in Channel Manager, use the CURSOR button ̆ or ̄ to highlight the
channel number. Once the desired channel is highlighted, press the CURSOR button
̈ to move to the scan column, then press
CURSOR button ̆ or ̄ to select ON or OFF.
Move SEL Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Move SEL ̇ Return
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Move Set
Ch# Scan CH ID Lock
2 Off --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
Ch# Scan CH ID Lock
2 On --------
3 Off --------
4 Off --------
5 Off --------
6 Off --------
7 Off --------
8 Off --------
9 Off --------
[ ]
[ ] [ ]
Move Set
Tune
Chan. Manager
Ant. A
Chan. Manager
Ant. A
Chan. Manager
Ant. A
Chan. Manager
Ant. A
NOTE: Lock feature cannot be selected or set in Channel List.