HONDA FG110 - Manual (Page 13)

13
Fuel Tube Inspection
Check the fuel
supply and return
tubes, and replace
any tube that is
damaged, cracked,
or leaking.
Refer to the Honda
shop manual for
tube replacement
instructions, or take
the tiller to an
authorized Honda
servicing dealer.
Fuel Filter and Fuel Tank Cleaning
1. Remove the fuel
tank cap.
2. Tip the tiller as
shown and empty
the fuel tank into
an approved
gasoline
container. Use a
funnel to avoid
spilling gasoline.
3. Pull the fuel filter
out through the fuel
filler neck by
hooking the black
fuel supply tube
with a piece of wire,
such as a partly
straightened paper
clip.
4. Inspect the fuel
filter. If the fuel filter
is dirty, wash it with
nonflammable
solvent. Be careful
to avoid damaging
the filter.
5. Replace the filter if
it is damaged or
excessively dirty.
6. Rinse sediment
from the fuel tank
with nonflammable
solvent.
7. Insert the fuel filter in the fuel tank, and install the fuel tank cap.
FUEL
SUPPLY
TUBE
(black)
FUEL
RETURN
TUBE
(clear)
FUEL
FILTER
WIRE
FUEL
SUPPLY
TUBE (black)