HONDA HRR216TKA - Manual (Page 46)

44
SET-UP
Unpacking
Remove all the cardboard from the
mower, including the piece around
the handlebar.
Handlebar Setup
Loosen the two knobs on the lower
handlebar. Hold the flywheel brake
lever against the handlebar, and
unfold the handlebar into the
mowing position. Remove the piece
of paper between the handlebar
and the frame. Once the handlebar
is in place, tighten the knobs securely.
Grass Bag Assembly
Slide the grass bag frame into the grass bag and attach the clips as
shown.
Lift the rear discharge guard,
remove the mulching plug, then
install the grass bag.
LOCKING
KNOB (2)
FLYWHEEL BRAKE LEVER
GRASS BAG
BAG
FRAME
PLASTIC CLIP BAG FRAME
GRASS BAG
HANDLE REAR DISCHARGE
GUARD
POM53763.book Page 44 Friday, February 11, 2005 10:58 AM