HONDA HRR216TKA - Manual (Page 23)

OPERATION
21
MOWING TIPS
Which Blades?
Grasses and lawn conditions vary greatly, so Harmony II models can
use various combinations of standard and accessory blades. Use this
blade application guide to help determine which blades are best suited
for your lawn. For more information about blades, see page 55.
Always use an upper and lower blade.
When to Mow
Most grasses should be mowed when they have grown ½ to 1 inch
above their recommended height. More frequent mowing is required
for mulching than for bagging. For best mulching results, you may
need to mow the lawn twice a week during the growing season.
Cutting Height
Consult a local nursery or lawn and garden center for cutting height
recommendations and advice about specific types of grasses and
growing conditions in your area.
Most grass has stems and leaves. If you cut off the leaves, you’ll scalp
the lawn. Let the grass recover between mowings. Your mower will
work better, and your lawn will look better.
If your grass gets too tall, cut it once at the highest cutting height
setting, then mow again in 2 or 3 days. Don’t take off more than one
third of total grass height in any one mowing, or brown patches may
develop. Cutting height adjustment is explained on page 9.
Cutting Width
For an even lawn finish, overlap each mowing swath by a few inches. If
the grass is very tall or thick, use more overlap and a narrower mowing
swath.
Performance
Blades Part Number
Mulching Bagging
Best Good
Standard upper mulching
Optional lower mulching
72531-VE2-020
72511-VE2-000
Good Best
Standard upper mulching
Standard lower high-lift
bagging/mulching
72531-VE2-020
72511-VE1-020
POM53763.book Page 21 Friday, February 11, 2005 10:58 AM