HP A9834-9001B - Manual (Page 127)

Chapter 3
Installing the System
Booting and Verifying the System
127
Booting the HP Integrity Superdome/sx2000 to a EFI Shell
After powering on or using the CM bo command, all partition console windows will show activity while the
firmware is initialized and will stop momentarily at an EFI Boot Manager menu (Figure 3-47).
Figure 3-47 HP Integrity Superdome/sx2000 EFI Boot Manager
Use the up and down arrow keys on the keyboard to highlight EFI Shell (Built-in) and press Enter . Do
this for all partitions.
After you invoke the EFI Shell, the console window displays the EFI shell prompt shown in Figure 3-48.