HP A9834-9001B - Manual (Page 85)

Chapter 3
Installing the System
Unpacking and Inspecting the System
85
Step 3. Verify that the I/O chassis mounting screws are in place and secure (Figure 3-7).
Inspect all components for signs of shifting during shipment or any signs of damage.
Figure 3-7 I/O Chassis Mounting Screws
Moving the Cabinet Off the Pallet
Step 1. Remove the shipping strap that holds the BPSs in place during shipping (Figure 3-8 on page 86).
Failure to remove the shipping strap will obstruct air flow into the BPS and FEPS.
Mounting screws
I/O chassis