Homelite VAC ATTACK II UT08934D - Manual (Page 7)

Page 7
FEATURES
KNOW YOUR BLOWER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BLOWER TUBE AND NOZZLE
The blower tubes can be assembled and installed on the
blower using no tools.
CRUISE CONTROL / THROTTLE LOCK
The Cruise Control (throttle lock) feature allows the user to
operate the blower without holding the throttle trigger. To
stop the engine, simply push the cruise control knob after
the engine has returned to idle speed.
HIGH VELOCITY NOZZLE
The high velocity nozzle allows you to scrape wet leaves or
debris while operating the blower.
MOTOR
The blower has a powerful 30cc engine with sufficient power
to handle tough blowing and vacuuming jobs.
MULCHER/VACUUM
The blower is equipped with a mulcher feature that efficiently
reduces leaves at a 12:1 ratio. It converts to a mulcher/
vacuum using no tools.
THROTTLE TRIGGER
The blower can be operated at any speed between idle and
full throttle.
VACUUM BAG
The vacuum bag attaches to the blower easily using the
vacuum bag adaptor.
VACUUM TUBES
The vacuum tubes can be installed on the blower without
using any tools.
WIDE SWEEPER NOZZLE
The wide sweeper nozzle allows for more area to be covered
during blower operation.
ASSEMBLY
UNPACKING
This product requires assembly.
n
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-242-4672 for assistance.
PACKING LIST
Blower
Upper Blower Tube
Wide Sweeper Nozzle
High Velocity Nozzle
Upper and Lower Vacuum Tubes
Vacuum Bag and Vacuum Bag Adaptor
Tube Clamp
Operator’s Manual
Warranty Registration Card
NOTE: Read and remove all hang tags and store with your
operator’s manual.
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such altera-
tion or modification is misuse and could result in a hazard-
ous condition leading to possible serious personal injury.
WARNING:
Disconnect spark plug wire before assembling product.
Failure to do so could result in possible serious injury.
Fig. 2
NOZZLE UPPER
TUBE
Fig. 3
ADAPTOR
VACUUM
BAG