Hitachi CP-AW250N - Manual (Page 11)

11
Command Control via the Network
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table ( &
17 ).
Connection
1. Turn off the projector and the computer.
2. Connect the projector's LAN port and the computer's LAN port with a LAN
cable. Use the cable that fulfi lls the specifi cation shown in fi gure (Use CAT-5
or greater LAN Cable when LAN ports are used )
3. Turn the computer on, and after the computer has started up turn the
projector on.
Command Control via the Network
LAN LAN
LAN cable (CAT-5 or greater)