HONDA TL5040 - Manual (Page 9)

Fig. 7
Grease
Fig. 9
grease fitting
tractor end . tiller end
Driveline
Fig. 15
DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
Inspect the Rotary Tiller thoroughly after
assembly to be certain it is set up properly before
delivering it to the customer. The following check
list is a reminder of points to inspect. Check off
each item as it is found satisfactory or after
proper adjustment
is made.
- Check all bolts to be sure they are tight.
- Check that all cotter pins are properly
- Check that all lubrication points with grease
- Check that tines have been properly installed.
- Check gear box oil level.
- Verify safety labels are applied and are in good
installed
fittings have been lubricated.
condition.
PRE-DELIVERY CHECK LIST
- Show customer how to make adjustments.
- Explain importance of lubrication to customer
and point out lubrication points on tiller.
- Give this Operator's Manual to the customer and
ask customer to become familiar with all
sections of it.
7