HP Media Gateways G250 - Manual (Page 18)

Introduction
18 Overview for the Avaya G250 and Avaya G350 Media Gateways
ETH LAN POE
(G250-Analog, G250-BRI,
and G250-DS1) Eight Power over Ethernet (PoE) LAN ports with
80 watts (aggregated for all ports) for connecting
IP phones or any Ethernet devices, such as PCs.
RST Reset button. Resets chassis configuration.
ASB Alternate Software Bank button. Reboots the G250
with the software image in the alternate bank.
DCP (G250-DCP) Twelve DCP ports. These DCP ports are intended
for in-building use only.
T1/E1 port (G250-DS1) For T1, this port is capable of supporting inband
signalling across all 24 channels (supports a
maximum bandwidth of 1.536 Mbps).
For E1, this port is capable of supporting R2MFC
signalling across all 30 channels (supports a
maximum bandwidth of 1.92 Mbps).
PRI port (G250-DS1) The PRI port is capable of supporting PRI
signalling for 23 or 30 bearer channels. NFAS
signalling is not supported.
Table 1: Fixed ports and buttons on the G250 front panel (continued)
Port Description
2 of 2