HP Media Gateways G250 - Manual (Page 53)

Issue 5 June 2008 53
Chapter 4: Management, Security, Alarms
and Troubleshooting
Management applications
The Avaya G250 and Avaya G350 Media Gateways can be managed using any of the following
applications:
● Avaya G250 and Avaya G350 Command Line Interfaces
● Avaya G250/G350 Manager and Embedded Web Manager
● Avaya Integrated Management
● Avaya QoS Manager
Avaya G250 and Avaya G350 Command Line Interfaces (CLI)
You can use the Avaya G250 or G350 CLI to configure the G250/G350 and its media modules.
The CLI is a textual command prompt interface. It is similar to the CLI of many other network
devices.
You can access the CLI with any of the following:
● Telnet through the network
● Telnet through dialup, using a dialup PPP network connection
● A console device connected to the Console port or on the G250/G350 front panel
● SSH (Secure Shell), which enables you to establish a remote session over a secured
tunnel
For information about each command in the CLI, see the Avaya G250 and Avaya G350 Media
Gateway CLI Reference, 03-300437.
For information about how to use the CLI to perform specific configuration tasks, see
Administration for the Avaya G250 and Avaya G350 Media Gateways, 03-300436.