Hunter Fan 44127 - Manual (Page 22)

44067-01 • 05/24/2010
22
5
Scheduling
Save Away
The Save Away feature allows you to set a lower or higher temperature
for time you will be away from your home outside of your normal Away
schedule. This can include days you will be away for vacation, or a few hours
away from your home.
The Save Away feature can be set for as little as 1 hour or as much as 30
days. To set the save away feature:
1. Press the
Save
Away
button.
2. You will see the number of hours or days flashing on the screen, use the
or to adjust the amount of time you will be away. Press the
Next
button to
advance to your temperature setting. By default, the “Away” temperature
will be selected. You can use the or to adjust the degrees if you do
not want to run this temperature .
Note: Up to 12 hours can be set before changing over to day increments.
3. Press the
Done/
Home
button to finish Save Away settings. The screen will show
“Update!” and return to the home screen.
4. You will notice the bar will be on beside the Save Away button to indicate
it is active. Also, the screen displays the number of hours or days the Save
Away feature is set for. See figure 4.
Note: To escape Save Away mode, press
Done/
Home
to resume your schedule.