HP iPAQ Bluetooth Hands-Free Headset F8T061eaHP - Manual (Page 23)

Pairing Process for Sony Ericsson T610, T616, T618
1. Ensure that your Headset is turned off.
2. Press and hold down the talk button. After approximately
eight seconds, the blue light will flash five times, indicating
the Headset is powered on. Do not release the button
until you see an alternating blue and red light. This
indicates the Headset is in pairing mode.
3. Go to the Menu screen for your T610 series.
4. Select the “Connect” icon, then select “Bluetooth”.
5. Select “Hands-free Devices”.
6. Select “My Hands-free” and “Add a new hands-free device”.
7. Your phone will find the “HP Headset” and list it under
“Found Devices”.
19
Pairing to a Bluetooth Technology-Enabled Phone
1
2
3
4
5
se
cti
on