Husqvarna 2003-06 - Manual (Page 29)

English- 30
MENU FUNCTIONS
1. Commands
Via this selection in the main menu you access the
main Auto Mower functions. Select among the sub-
menus:
• Charge then AUTO (1-1)
in order for the Auto Mower to drive immediately to
the charging station, charge the battery and then
return to the automatic operating mode. Select the
function and press YES when the cursor is on ”Yes”.
• Show latest faults (1-2)
to show the list of saved fault messages. Browse
with the arrow buttons. The list can contain up to 20
fault messages and each message is shown with
the date and time.
• Reset factory settings (1-3)
to restore all settings to their original values. Every-
thing except the language, PIN code and the set-
tings under the buttons A, B and C are reset. Select
the function, state your PIN code and press YES
when the cursor is on ”Yes”.
• Reset ABC settings (1-4)
to delete all programming made under the buttons
A, B and C. Select the function and press YES when
the cursor is on ”Yes”.
2. Timer
Via this option in the main menu you access the timer
settings. Select among the submenus:
• Timer override (2-1)
to temporarily disconnect the timer function.
• Day timer (2-2)
to set the start and stop times.
• Weekend timer (2-3)
to set the start and stop times for the days Friday -
Sunday.
• Week Timer (2-4)
to select which days of the week the Auto Mower
should mow.
Timer override (2-1)
If you set the timer on your Auto Mower you can use
this function to temporarily get maximal operation from
the mower.
• ON (2-1-1)
Move the cursor to ”ON” and press YES to turn off
the timer function.
• OFF (2-1-2)
Move the cursor to ”OFF” and press YES to turn on
the timer function.
Charge then AUTO
Show latest faults
Make factory set-
tings
Reset ABC settings
Commands
Timer
Installation
Settings
1-
Timer override
Day timer
Weekend timer
Week timer
Commands
Timer
Installation
Settings
2-
Timer override
Day timer
Weekend timer
Week timer
2-1
ON
OFF
2-1-