Hitachi 27CX01B User Manual
Page 31
SET UP
31
5
Press VOL (+) or (-) to access CH SETTING mode.
6
Press CH UP (
) or DOWN (
) to move the " " mark to the "SIGNAL SOURCE", then press
VOL (+) or (-) to access signal source MODE.
7
Press CH UP (
) or DOWN (
) to move the " " mark to the DESIRED MODE.
8
Press MENU to exit.
NOTE:
• Receivable channels of your TV set are:
AIR channels: VHF: 2 through 13
CABLE channels: 1 (HRC and IRC mode only)
UHF: 14 through 69
2 through 125 (STD, HRC and IRC)
SAVING BROADCAST TV CHANNELS INTO MEMORY.
1.1
Press MENU to access MAIN MENU screen, then press CH UP (
) or DOWN (
) to move the " " mark
to "SET UP".
1.2
Press VOL (+) or (-) to access SET UP mode, then press CH UP (
) or DOWN (
) to move the " "
mark to "CH SETTING".