Horizon Fitness ELITE SERIES AFG ELLIPTICAL E6 - Manual (Page 5)

BEFORE
YOU
BEGIN

INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y

INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY STEP 2
A) Open HARDWARE BAG FOR STEP 2.
B) Slide CONSOLE MAST BOOT onto the bottom of the CONSOLE MAST.
C) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the CONSOLE
MAST.
D) Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (B), 4 SPRING WASHERS (C) and 4 FLAT
WASHERS (D).
ASSEMBLY STEP 
MAIN FRAME
CONSOLE WIRES
CONSOLE MAST
BOLT (B)
SPRING WASHER (C)
FLAT WASHER (D)
CONSOLE MAST BOOT
BOLT (B)
15 mm
Qty: 6 SPRING WASHER (C)
15 mm
Qty: 6 FLAT WASHER (D)
18 mm
Qty: 6
HARDWARE BAG FOR STEP 2 CONTENTS :
NOTE: There is NO hardware bag for this step.
A) Slide CONSOLE MAST BOOT up.
B) Carefully snap TOP COVER into the MAIN FRAME.
C) Slide CONSOLE MAST BOOT down over the TOP COVER.
MAIN FRAME
CONSOLE
MAST
BOOT
TOP COVER
E6_Rev.1.2.indd 8-9 8/7/06 4:43:31 PM