HP 820 - Manual (Page 88)

84
|
HP Jornada H/PC User’s Guide
To create a Remote Networking connection
1. On the Start menu, point to Programs, point to
Communication, and then click
Remote Networking.
2. In the Remote Networking folder, double-click
Make New Connection.
3. In the Make New Connection dialog box, click
Dial-up, and then click Next.
4. If you have the HP Jornada 820, select the Built-
In Modem from the list of modems. If you have the
HP Jornada 820e, select the appropriate option for
the modem you have installed.
5. Click TCP/IP Settings, and then click General.
Make sure the Use Server-assigned IP Address
check box is selected.
6. On the Name Servers tab, click Server-assigned
addresses, and then click OK.
7. Click Next and fill in the phone number you wish to
dial. Click Finish. Now, a new icon appears, labeled
with the name you chose, in your Remote Network-
ing folder. This connection will also appear in your
remote synchronization dialog box.
To set a dialing location for a Remote Networking connection, double-click the icon for the
connection in the Remote Networking folder. In the
Dial-up Connection dialog box,
click Dial Properties, and then fill in the information as you would for a network or
ISP connection using the HP Jornada dialup application.
To start remote synchronization
1. On your HP Jornada Start menu, point to
Programs, point to Communication, and then
click
ActiveSync.