Hitachi VT-MX424A - Manual (Page 43)

REMOTE CONTROL OF THE CABLE CONVERTER
43
CONTROLLING THE TV
Once programmed, the VCR's remote control is ready to control the TV.
NOTE: Be aware that not all of your TV's functions may work even though the remote control
is correctly programmed.
1 Select the TV function mode
First press the TV button to change to the TV function mode, then press the button of the TV
function that you want.
For example;
Press the TV button and the CH (
), and the TV station will change to the next higher station.
2 Return to the VCR function mode
Press the VCR button to operate your VCR with the remote again.
REMOTE CONTROL OF THE CABLE CONVERTER
If you have a cable converter, you will probably want to program your VCR's remote control so
you can easily change channels. The process is the same as for programming the remote to
operate your TV. For additional details, see the previous.
PROGRAMMING THE REMOTE CONTROL OF THE CABLE CONVERTER
1 Program the remote control
Hold down the CATV button and press the number of your brand of cable box (shown in the
chart).
NOTE: If that button combination does not work, or if your brand is not on the chart, just go
through all the button combinations until you find the one that works best.
TO OPERATE THE CABLE BOX ONCE THE REMOTE IS PROGRAMMED FOR IT
1
Press the CATV button and then the button of the function you want.
2
Press the VCR button to operate your VCR with the remote again.