HP e-Vectra - Manual (Page 7)

Setting Up Your e-Vectra
7
Se
tt
in
g
Up
Y
ou
r e
-V
ec
tr
a
Securing Your e-Vectra
The HP port control system has been designed to secure your e-Vectra. To
attach the port control system:
1 Connect the AC adapter, mouse and keyboard to the rear of the
e-Vectra.
2 Feed the monitor cable through the rear of the port control system, then
attach the monitor connector to the rear of the e-Vectra.
The cables of devices which use the parallel or serial port should also be
fed through the rear of the port control system before connecting.
3 Attach the port control system.
4 Lock the port control system (with the key).
Your e-Vectra is now ready for use. If you want to attach the footstand
then refer to “Attaching the Foot Stand” on page 8.
Step 1
Step 2
Step 3
Step 4