Harbor Freight Tools 92126 - Manual (Page 2)

SKU 92126 For technical questions, please call 1-800-444-3353. Page 2
Specifications
Construction
Cast Aluminum Body and
Cup; Brass Nozzle
Includes Cleaning Brush and Wrench
Operating Pressure 20-50 PsI
Air Inlet 1/4” NPs
Features Adjustable nozzle
Capacity 4 oz. gravity feed cup
Air Consumption 3 CFM @ 50 PsI
Net Weight 0.8 lb.
Save This Manual
You will need the manual for the safety warnings and precautions,
assembly instructions, operating and maintenance procedures, parts list and
diagram. Keep your invoice with this manual. Write the invoice number on
the inside of the front cover. Keep the manual and invoice in a safe and dry
place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use this sprayer in damp or wet
locations. Don’t expose to rain. Keep work area well lit. Do not use air
compressors in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle air lines, machines, tools, paint, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this tool
and do not use this tool for a purpose for which it was not intended.
6. Dress properly. Protective, electrically nonconductive clothes and nonskid
footwear are recommended when working. Wear restrictive hair covering
to contain long hair.
7. Use eye protection. Always wear ANSI approved impact safety goggles.
Wear an ANSI approved dust mask and respirator when working around
paint spray, chemical dusts and mists.