HP 110 - Manual (Page 61)

Keyboard
NOTE: For the complete list of available keyboards, see Computer major components on page 16 .
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 44 ).
5. Remove the service door (see Service door on page 45 ).
Remove the keyboard:
1. Position the computer upside down on a flat surface.
2. Remove the two Phillips M2.0x5.0 screws that secure the keyboard to the computer.
Component replacement procedures 53