Husqvarna 125C User Manual
Page 2
2
CONTENTS
Contents
CONTENTS
Contents
2
. . . . . . . . . . . . . . . . . . . . . . . .
Note the following before starting
2
. . . .
KEY TO SYMBOLS
Symbols
3
. . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY INSTRUCTIONS
Personal protective equipment
4
. . . . . .
Machine’s safety equipment
4
. . . . . . . .
Cutting equipment
5
. . . . . . . . . . . . . . . . .
Checking, maintaining and servicing
the machine’s safety equipment
5
. . . . .
General safety precautions
8
. . . . . . . . .
Starting safety
8
. . . . . . . . . . . . . . . . . . . .
Fuel safety
8
. . . . . . . . . . . . . . . . . . . . . . .
Transporting and storage
9
. . . . . . . . . . .
General working instructions
9
. . . . . . . .
Basic safety rules
9
. . . . . . . . . . . . . . . . .
Basic working techniques
9
. . . . . . . . . .
KNOW YOUR TRIMMER
Know your trimmer
11
. . . . . . . . . . . . . . . .
ASSEMBLY
Fitting the loop handle
12
. . . . . . . . . . . . .
Fitting the trimmer guard and
trimmer head
12
. . . . . . . . . . . . . . . . . . . . .
FUEL HANDLING
Fuel
13
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fueling
13
. . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND STOPPING
Check before starting
14
. . . . . . . . . . . . . .
Starting and stopping
14
. . . . . . . . . . . . . .
MAINTENANCE
Carburetor
16
. . . . . . . . . . . . . . . . . . . . . . .
Muffler
16
. . . . . . . . . . . . . . . . . . . . . . . . . .
Spark plug
17
. . . . . . . . . . . . . . . . . . . . . . .
Air filter
17
. . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel gear
17
. . . . . . . . . . . . . . . . . . . . . . .
Maintenance schedule
18
. . . . . . . . . . . . .
TECHNICAL DATA
Technical data
20
. . . . . . . . . . . . . . . . . . . .
YOUR WARRANTY RIGHTS AND
OBLIGATIONS
21
. . . . . . . . . . . . . . . . . . .
EMISSION CONTROL
WARRANTY STATEMENT
22
. . . . . . . . .
Note the following before
starting:
Husqvarna AB has a policy of continuous
product development and therefore
reserves the right to modify the design and
appearance of products without prior
notice. Long--term exposure to noise can
result in permanent hearing impairment.
Always use approved hearing protection.
Maintenance, replacement, or repair of the
emission control devices and system may
be performed by any nonroad engine re-
pair establishment or individual.
The Emissions Compliance Period referred
to on the Emissions Compliance label indi-
cates the number of operating hours for
which the engine has been shown to meet
Federal emissions requirements.
Category C = 50 hours, B= 125 hours, and
A = 300 hours.
For reference, please fill out the following
information that will be needed for future
servicing of your trimmer:
Model Number:
Serial Number:
Purchase Date:
Purchased From:
WARNING!
A clearing saw,
brushcutter or trimmer can be
dangerous if used incorrectly or
carelessly, and can cause serious
or fatal injury to the operator or
others. It is extremely important
that you read and understand the
contents of this operator’s manual.
WARNING!
Under no circum-
stances may the design of the
machine be modified without the
permission of the manufacturer.
Always use genuine accessories.
Non--authorized modifications
and/or accessories can result
in serious personal injury or the
death of the operator or others.
Your warranty may not cover
damage or liability caused by the
use of non--authorized accesso-
ries or replacement parts.
WARNING!
The engine exhaust
from this product contains chemicals
known to the State of California to
cause cancer, birth defects or other
reproductive harm.