Hearth and Home Technologies WSK-MLT User Manual

Page 7

Advertising
background image

7

INTELLIFIRE (IPI) MODELS ONLY

Cold Climate Button

• Button Press: Turns on Climate Control

• Button Press: Turns off Climate Control

This allows the pilot fl ame to stay lit when activated, a ben-
efi t of this is reduced condensation on the glass at start-up
in colder climate conditions
.

Operation Under Battery Power

A switch on the control box allows for battery power under
no-power conditions (see Figure 8). By controlling the
power supply with this switch, the batteries are supplying
power only when needed, thus extending battery life. The
switch also provides a convenient means for switching to
battery power should there be a loss of 110 VAC power to
the control box.

• In the event of a power failure, switch the battery

operation switch to the “Battery ON” position.

• The fi replace can now be turned on and off with the ON/

OFF rocker switch located near the gas valve.

• The wall switch functions will not operate under battery

power.

• Under battery control the only available function is fl ame

“On” and “Off” in the high position.

• To maximize battery life, and to restore full function

capability of the wall switch, fl ip switch to “OFF” position
after 120 VAC power is restored.

SERVICE PARTS LIST

Child Proof Mode

To Enter Child Proof Mode:

• Press the Up Arrow Button twice and Down Arrow Button

once. The unit will send out 3 beeps and an indicator in
the LCD panel will show that the child proof is on.

To Leave Child Proof Mode:

• Press the Up Arrow Button twice and Down Arrow Button

once. The unit will send out 3 beeps and the indicator in
the LCD panel that shows that the child proof is on will
disappear.

Figure 8

DESCRIPTION

SERVICE PART NO.

SOLENOID

HTI-17-006

WALL SWITCH/KEY PAD

HTI-12-007

CONTROL WIRE

HTII-23-007

COVER PLATE

HTI-21-007

CONTROL BOX

HTI-13-007

ACTUATOR PINS

HTI-17-116

SWITCH KIT

HTI-25-007

BATTERY

OPERATION

SWITCH

“BATTERY ON”

POSITION

POSITION

CONTROL

BOX

“OFF”

NOTE: When in Child Proof Mode, only the arrow buttons
will have functionality. Unit can enter Child Proof when the
fi replace is on or off.

Advertising