Husqvarna 240F - Manual (Page 33)

English – 33
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
Technical data 240R 240F
Engine
Cylinder displacement, cm 3 40,2 40,2
Cylinder bore, mm 40,0 40,0
Stroke, mm 32 32
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 12500 12500
Speed of output shaft, rpm 9190 9190
Max. engine output, acc. to ISO 8893 1,8/9000 1,8/9000
Catalytic converter muffler No No
Speed-regulated ignition system No No
Ignition system
Manufacturer/type of ignition system EM/ET EM/ET
Spark plug NGK BPMR 7A/
Champion RCJ 7Y NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, mm 0,5 0,5
Fuel and lubrication system
Manufacturer/type of carburettor Walbro WT Walbro WT
Fuel tank capacity, litre 0,8 0,8
Weight
Weight without fuel, cutting attachment and guard, kg 8,6 8,4
Noise emissions
(see note 1)
Sound power level, measured dB(A) 114 114
Sound power level, guaranteed L
WA
dB(A) 114 116
Noise levels
(see note 2)
Equivalent noise pressure level at the operator’s ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.: 100/104 98/101
Vibration levels
Vibration levels at handles, measured according to EN/
ISO 11806 and ISO 7916, m/s
2
At idle, left/right handles, min.: 2,1/2,1 3,2/3,0
At idle, left/right handles, max.: 2,4/2,8 3,8/4,1
At max. speed, left/right handles, min.: 2,9/2,4 1,9/2,4
At max. speed, left/right handles, max.: 4,0/3,5 4,2/4,7