Installing a child seat – HONDA 2008 Ridgeline User Manual

Page 52

Advertising
background image

When using a tether anchor, always
hook the tether strap through the
upper guide to route it properly.

Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.

Each outer seating position has a
tether anchor at the outside of the
seat bottom. The center seating
position has a tether anchor between
the lower anchors for the LATCH-
compatible child seat. Each anchor
point is shown above.

Lift the cover, then hook the
tether strap through the upper
guide as shown.

After properly securing the child
seat (see page

), lift the head

restraint, then route the tether
strap over the seat-back and
through the head restraint legs.

A child seat with a tether can be
installed in any seating position in
the back seat.

1.

2.

44

Installing a Child Seat

Installing a Child Seat with a
Tether

Using an Outer Tether Anchor

46

COVER

UPPER
GUIDE

UPPER GUIDE

CENTER
TETHER
ANCHOR

OUTER
TETHER
ANCHOR

OUTER TETHER ANCHOR

Advertising