Harbor Freight Tools 3-IN-1 Air Framing Nailer 98751 User Manual

Page 14

Advertising
background image

SKU 98751

For technical questions, please call 1-800-444-3353.

Page 14

force. Keep your fingers clear when

releasing.

5.

If you are unable to clear the nail

jam using the method prescribed

above, the tool should be taken to

a qualified service technician for

proper servicing.

User-Maintenance Instructions

Procedures not specifically

explained in this manual

must be performed only by a

qualified technician.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn off the tool, detach the

air supply, safely discharge

any residual air pressure in

the tool before performing any

inspection, maintenance, or

cleaning procedures.
TO PREVENT SERIOUS

INJURY FROM TOOL

FAILURE:

Do not use damaged

equipment. If abnormal

noise, vibration, or leaking

air occurs, have the problem

corrected before further use.

TO PREVENT EXPLOSION:

Lubricate the tool only

with specified lubricants.

Lubricate the air inlet

using only pneumatic tool

oil. Lubricate the internal

mechanism using only

white lithium grease. Other

lubricants may damage the

mechanism and may be

highly flammable, causing an

explosion.

WARNING! Anytime any

maintenance or repairs are

done, wear ANSI-approved

impact safety goggles and

appropriate hearing protection.

THEN:

a.

Disconnect the Nailer from its air

supply.

b.

Empty the Magazine (79) com-

pletely.

c.

Try to fire the Nailer into a piece of

scrap wood to ensure that there is

no trapped air in the system.

d.

Always leave Magazine open dur-

ing maintenance. The Magazine

is spring-loaded and may cause

parts or a nail to fly out of Nailer.

6. Dirt in the air supply is a major cause

of pneumatic tool wear. Use a filter in

the compressed air system for better

performance and longer tool life.

7.

Make sure Trigger (59) and Safety

Nosepiece (42) move freely, with-

out sticking. Do not use nailer if

Trigger or Safety Nosepiece sticks.

8. Wipe down exterior of the Nailer with

a clean cloth before storing.

9. Store in a clean, dry and safe location

out of reach of children.

REV 09e

User-Maintenance

Advertising