Assembly – Husky HU80522 User Manual
Page 9
 
9
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate this 
tool until the parts are replaced. Failure to heed this warn-
ing could result in serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such 
alteration or modification is misuse and could result in a 
hazardous condition leading to possible serious personal 
injury.
WARNING:
To prevent accidental starting that could cause serious 
personal injury, always disconnect the engine spark plug 
wire from the spark plug when assembling parts.
NOTE: Do not start the pressure washer until the engine has 
been filled with oil, all hoses are connected, and the water 
is turned on. Running this machine without oil will damage 
the engine; running 
this machine without water will damage
the high pressure pump.
RAISING AND LOWERING THE TELESCOPING 
HANDLE
See Figure 2.
NEVER lift, or attempt to lift, the pressure washer by the 
telescoping handle. Only lift this product using the carrying 
handles located on each side of the unit.
To raise the handle, push the button while pulling the
handle up and out of the handle tube.
NOTE: The handle will “click” as it locks in place.
To lower the handle, push the button while pushing the
handle down into the handle tube.
Fig. 2
HANDLE
BUTTON
HANDLE TUBE