Husqvarna 225B - Manual (Page 4)

4
– English
KEY TO SYMBOLS
Symbol Description Location
Oper
ator’
s
man
ual
Blower
Checks and/or mainten-
ance shall be carried out
after having switched off
the engine. The stop
switch must be set to the
STOP position.
Cleaning at regular
intervals is required.
Approved protect goggles
or visor must be worn.
Approved protect goggles
or visor and ear protection
must be worn.
WARNING! The blower
can be dangerous!
Careless or improper use
can cause serious, even
fatal injury.
Read through the
Operator‘s Manual
carefully and understand
the content before using
the machine.
WARNING! Make sure
that the inspection cover is
locked in the closed
position or that the
vacuum tube is mounted
on the blower. Never touch
the impeller.
WARNING! The blower
may throw objects at high
velocity that can ricochet
and hit the operator. This
may cause serious eye
damage.
The blower operator must
make sure that no
bystanders or animals
come nearer than 10
metres. Whenever several
operators are working in
the same work area, they
should maintain a safe
distance of at least 10
metres from one another.
Symbol Description Location
Blower
Choke.
Refueling.
Stop switch.
The manufacturer warrants
that this product meets
European safety
requirements according to:
• The Machine Directive
• The EMC Directive
• The Low Voltage
Directive
Instructions on how to
open the inspection cover.
Noise pressure level
measured at 15 metres
distance according to
ANSI B175.2-1996.
Noise emission to the
environment according to
the European
Community’s Directive.
The machine’s emission is
specified in chapter
Technical data and on
label.
Operator’
s
man
ual
X
X
X
X X
X X
X X
X X
X X
X X
X
X
X
X X
X
X
X
70
dB (A)
per ANSI B175. 2-1996
Other symbols/decals on the machine refer
to special certification requirements for
certain markets.