Pc configuration – Hawking Technology Wireless-G Router User Manual

Page 35

Advertising
background image

Advanced Administration

Reset

Click Reset to restore to default values.

Navigation & Data Input

•

Use the menu bar on the left of the screen, and the "Back" button on your Browser,
for navigation.

•

Changing to another screen without clicking "Save" does NOT save any changes
you may have made. You must "Save" before changing screens or your data will be
ignored.

PC Configuration

4

This Chapter details the PC Configuration required on the local ("Inter-
nal") LAN.

Overview

For each PC, the following may need to be configured:

•

TCP/IP network settings

•

Internet Access configuration

•

Wireless configuration

Windows Clients

This section describes how to configure Windows clients for Internet access via the
Wireless Router.

The first step is to check the PC's TCP/IP settings.

The Wireless Router uses the TCP/IP network protocol for all functions, so it is essential
that the TCP/IP protocol be installed and configured on each PC.

TCP/IP Settings - Overview

If using the default Wireless Router settings, and the default Windows
TCP/IP settings, no changes need to be made.

•

By default, the Wireless Router will act as a DHCP Server, automatically provi ding a
suitable IP Address (and related information) to each PC when the PC boots.

•

For all non-Server versions of Windows, the default TCP/IP setting is to act as a
DHCP client.

Advertising