Humminbird Matrix Series Sonar Fishfinder Model Matrix 87 - Manual (Page 38)

69
Triplog Reset
Triplog Reset resets the Triplog to zero. The Triplog provides the
following information: timer for elapsed time, distance traveled
since last reset, and average speed.
NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display Triplog
information on the screen.
To Reset Triplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor key once
more. To cancel Reset Triplog, press the LEFT Cursor key.
Restore Defaults
Restore Defaults resets ALL menu settings to their factory
defaults. Use this menu choice with caution!
To Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT Cursor key
once more. To cancel Restore Defaults, press the LEFT Cursor key.
68
Units - Speed
Units - Speed selects the units of measure for speed-related
readouts.
To change the Units - Speed setting:
1. Highlight Units - Speed on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Speed setting.
(kph [International Models Only], mph, kts, Default = kph for International models and
mph for Domestic models)
User Mode
User Mode sets the menu system to either Normal or Advanced.
When set to Normal (default setting), only the basic menu options are shown. When set to
Advanced, additional menu choices are available.
To change the User Mode setting:
1. Highlight User Mode on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the User Mode setting.
(Normal, Advanced, Default = Normal)
Language
(International Only)
Language selects the display language for menus. International Models Only.
To change the Language setting:
1. Highlight Language on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Language setting.
(Default = English)
M87_Man_531352-1_A.qxd 12/9/2004 3:28 PM Page 74