HP E 800 - Manual (Page 9)

Setting Up the HP NetServer E 800
5
Step 3: Installing Memory
•
Use only HP DIMMs, which are 3.3V, 168-pin, PC133 (133 MHz),
buffered SDRAM DIMMs in 128 MB, 256 MB, or 512 MB.
•
DIMMs may be installed in any slot, in any combination (sizes mixed), in
any order, but HP recommends starting at slot 0 and filling the slots in
order with the largest size first: 0, 1, 2, and 3.
•
Ensure both latches close on the DIMM when completely installed.
System Board
0
1
2
3
Retaining Latches
DIMM Slot
Keys
Notches