HP XU - Manual (Page 82)

3 Troubleshooting Your PC Workstation
If Your PC Workstation Has a Hardware Problem
66 English
If Your Printer Does Not Work
• Make sure the printer’s power switch is ON.
• Verify that the power cord is plugged into the power outlet and the
printer.
• Verify that you have the correct cable for the printer. Make sure that
it is securely connected to the correct connector (port) on the
PC Workstation and printer.
• Check that the printer is online.
• Examine the paper feed mechanism for a paper jam.
• Make sure that the printer is configured correctly for the
PC Workstation and for the application.
a Ensure the PC Workstation’s port has been correctly configured
using Setup.
b Make sure the printer is correctly set up in your operating
system’s configuration.
c Ensure the application program’s “print” menu has been correctly
set up. (Refer to the manual supplied with the application
software.)
• Check that the PC Workstation’s port is working properly by running
another peripheral connected to the port.
• If you receive an error message, refer to the printer’s manual for help.
If the Flexible Disk Drive Does Not Work
• Check that you are using a formatted diskette and it is inserted
correctly.
• Check you are using a diskette that is the correct density.
• Check that the flexible disk drive is correctly configured in the Setup
program (Advanced > Flexible Disk Drive).
• Check that the flexible disk drive is not disabled in the Setup
program (Advanced > Flexible Disk Drive).
crystal.bk : cryst-3.fb4 Page 66 Monday, March 23, 1998 4:09 AM