HP TOUCHSMART 9100 - Manual (Page 47)

1st Drive
2nd Drive
For each, allows you to:
● Port Configuration (disable/enable)
● (view only)
◦ Capacity (Size - HDD only)
◦ Transfer Mode
● Smart Support - run HDD self-test for selected channel:
◦ SMART Status Check
◦ SMART Short Self-Test
◦ SMART Extended Self-Test
System Information (view only)
● Installed Memory
● Memory Bank 1
● Memory Bank 2
● BIOS Revision
● Core Version
● Product Number
● Model Number
● Serial Number (press Enter to change)
● Asset Tag (press Enter to change)
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.
Table 5-3 Computer Setup—Advanced
Option Description
CPU Type (view only)
CPU Speed (view only)
Cache RAM (view only)
SATA1 Controller Allows you to disable/enable the SATA Controller.
SATA Controller Mode If SATA1 Controller is enabled, allows you to set the mode to:
● IDE
● AHCI
USB Ports Allows you to enable/disable individual USB ports (USB Port 1 through USB Port 7).
Table 5-2 Computer Setup—Main (continued)
Computer Setup (F10) Utilities 41